ISCM-SENT TDK-Micronas (C13ab710)

ISCM-SENT TDK-Micronas (C13ab710)

The CompactRIO ISCM-SENT (TDK-Micronas) module developed by CGS can calibrate in parallel up to 2 Micronas single channel sensors. In addition, the module can read the data via SENT, PWM or Analog signals in parallel on the 2 channels. This is also possible if the two sensors work with different protocols e.g. Sensor 1 uses SENT and Sensor 2 PWM. The SENT is supported by standard SAEJ2716.

The computing power for the complex programming routine and SENT decoding is provided by an FPGA installed in the module. The FPGA of the CompactRIO chassis is only used for communication with the CGS module. This allows up to 8 intelligent modules per chassis to be operated. The module is available for calibrating different sensors from several manufacturers. A list of supported sensors, e.g. by TDK-Micronas will be sent on request. The ISCM supports the SENT standards SAE J2716 from February 2008, January 2010 and April 2016.

Icon

CGS_C13_ISCM_TDK_Micronas_datasheet_v1.6
1,53 MB

SKU: C13ab710.
Category: .
Communication

DLL, LabVIEW VI, VeriStand Custom Device

Bus

CompactRIO

Inputs

Up to 2 sensors (up to 8 with SPC)

Outputs

Up to 2 sensors

Frequency

Tick-Time programmable from 0,5 μs to 90 μs in 10 ns steps

Format

CompactRIO Single Module

Supported Sensors

HAL/C/R36xx, HAL/C/R37xx, HAL/C/R38xx, HAL/R24xx, on Request

Product number

a=1: 1 Channel
a=2: 2 Channels
b=1: SENT
b=3: SENT + PWM
b=5: SENT + Analog
b=7: SENT + PWM + Analog