MCM

MCM

The MCM is designed to drive a variety of brushed motors. This is the CM version of our IMCM. The overload-proof 4-quadrant chopper outputs voltages between 5.5V to 16V up to a constant load of 16A (32A peak). The PWM can be set between 1kHz and 20kHz. The module is protected against undervoltage and overvoltage, shuts down automatically when overheating and is also equipped with a linear current limiting. Furthermore, protection for cross-conduction is integrated. Additional features are reversal of rotation direction, revolution counter and brake to V+ or GND.

SKU: CM_MCM.
Category: .
Communication

DLL, LabVIEW VI, VeriStand Custom Device

Inputs

1x 5,5-16 V

Outputs

1x max. 16 V, 16 A (32 A Peak)

Frequency

PWM: 1-20 kHz

Other

In case current exceeds 10 A, identically named pins (e.g. V+) must be connected on the mating connector.

Format

35 mm DIN rail

The “Compact Module Series” is a low-cost solution. The modules are mounted on a 35mm DIN rail and offer various possibilities, from simple relay boards to current and voltage measuring cards with integrated multiplexers. These modules are also used in our load modules for example.

The modules are connected to the PC via USB and can be controlled via simple low-level commands, making them very easy to integrate into any type of software.

New modules are constantly being developed to cover the widest possible range of applications. Please contact our sales department if you have an application that is not already covered.